Saatavuus: Varastossa
2 000,00 €
Kuvaus
Uusi monikanavapääte Bowers&Wilkins valmistajalta!
Yksityiskohdat
Our CDA-16 distribution power amplifier can drive any Bowers & Wilkins custom installation speaker to new heights of performance. Offering 16 channels of power, the CDA-16 can enable your whole home with sound yet takes up minimal space thanks to its compact 1U design. Its configurable specification supports bridging of its Class D stereo channels into even more powerful mono outputs, if needed.
Load impedance range:
Output Power per
channel, non-clipped: Output Power bridge mode, non-clipped:
Output Power total,
all channels:
DC offset voltage:
Frequency Response (-3dB):
Frequency response accuracy 20Hz-20kHz:
Signal to Noise ratio
(Ref. 50W/8Ω):
THD+N (1kHz, 12.5W, 4Ω): Voltage Gain:
Input impedance: Maximum input voltage: Signal sense threshold:
Wake-up time:
Turn-off time:
12V trigger input threshold:
Controls & Indicators Front panel:
Rear panel
Connectors Input
Output
12V trigger control
Power
Power consumption:
AC supply: AC inlet:
Thermal
Thermal dissipation
Dimensions
Height: Width: Depth:
Net weight: Finish
>3Ω per channel (>6Ω in bridge mode)
>50W into 8Ω >100W into 4Ω >200W into 8Ω
>400W short term
>200W continuous average
<50mV
<10Hz to >50kHz, any load impedance ±0.5dB
>100dB A-Weighted
typically 0.05%
34.9dB to - in nity, adjustable
15KΩ
6.8V peak (4.8V rms sine wave)
2.5mV (independent of Gain setting)
<0.2s (If other zones active) <2s (From all zones inactive)
15 minutes from last signal detected typically 3V (recommended input is 5-15V)
1 x Power LED (unit active – White, Fault – Red)
8 x Zone status LEDs (Signal present – White, Fault – Red)
8 x 2-position DIP switches (link to global input)
1 x 3-position switch (power mode: on, auto detect, 12V trigger) 8 x input gain control with Clip indicator LEDs
8 x RCA (pair) Phono socket, line in (global in shared with Zone 8)
1 x RCA (pair) Phono socket (global out)
8 x 5.08mm Pitch 4-way Phoenix Combicon style
1 x 3.5 mm jack - 12V trigger IN
1 x 3.5 mm jack - 12V trigger OUT (Maximum 100mA pass-through)
<0.5W All zones inactive <45W All zones idling 300W maximum average 1,000W peak
100-240V 50/60Hz IEC C14, switched
1.7 BTU/hr (standby), 150 BTU/hr (Idle), 400 BTU/hr (max)
44.5 mm (1.8in) 1U [55.5 mm (2.2in) plus feet] 437 mm (17.2in)
310 mm (12.2in)
4.5kg (9.9lb) Black
